Support
Email gord@interrotron.app with your iPhone model, iOS version, and the version and build shown at the end of Interrotron's INFO page.
Requirements
- iOS 26 or later; iOS 26.2 or later for the AirPods microphone and relay.
- To find the microphone AirPod by itself: AirPods with head tracking (such as AirPods Pro) and Motion & Fitness allowed.
- An iPhone that runs several cameras at once. Back 2 needs two back cameras.
- Developed on iPhone 17 Pro with AirPods Pro 3.
Setting up the AirPods
Split one pair of AirPods. The Subject wears the microphone AirPod; the Shooter wears the other one and hears the Subject in it.
Before you start
- Any Microphone setting works (Settings › [your AirPods] › Microphone). With Automatic, the microphone moves to the other AirPod when its AirPod comes out of an ear. If Interrotron's L and R show ?, choose Always Left or Always Right, so you know which one to tap.
- Turn off Conversation Awareness. It switches to Transparency whenever the wearer talks.
- Use Noise Cancellation. Transparency can add static while the microphone is in use.
In Interrotron
- The Subject puts their AirPod in. If iOS shows its AirPods card, close it: the cameras pause while it is up, and a take that was recording stops and is saved. Interrotron adds the AirPods microphone, a POD page (its tab reads PODL or PODR, or POD? until it knows) and a speaker button beside Record. The POD page marks the microphone AirPod SUBJECT and the other SHOOTER.
- The Subject moves away from the iPhone, and the Shooter puts in the other AirPod.
- Tap the speaker button. The microphone AirPod says: “This AirPod has the active microphone. If you are the Shooter, then you want to move the active microphone to the Subject. If you are the Shooter, take this AirPod out for a moment, then put it back in your ear.” The other says: “The other AirPod has the active microphone.” Interrotron also says these by itself when it finds the microphone, and whenever it moves.
- If the Shooter hears “This AirPod has the active microphone”, they take their AirPod out for a moment and put it back in (with Automatic), or you swap AirPods.
On the POD page, SHOOTER chooses what the Shooter hears: the AirPod mic (the default) or Nothing. SUBJECT chooses what the Subject hears: Nothing (the default) or the iPhone mic, for the questions. Each has its own Sensitivity and Volume. Interrotron remembers both choices.
Good to know
- What you hear isn't what's recorded. Sensitivity and Volume change only what plays in the AirPods.
- How Interrotron knows. Apps can't read the AirPods' Microphone setting, but the AirPods' head-motion data comes from the microphone AirPod. Interrotron reads only which AirPod that is, and keeps no head movements. This needs AirPods with head tracking and Motion & Fitness allowed; without them, tap the AirPod that is the microphone.
- Turn off Mono Audio (Settings › Accessibility › Audio & Visual). While it is on, Interrotron turns off the AirPods mic relay, and the POD tab reads POD⚠︎.
- Stay in Bluetooth range of the iPhone.
Questions
Can more than one camera record 4K?
Two can. In Setup, 4K cameras sets how many, and 4K Priority is the order they get 4K in. With three cameras on, only the first fits in 4K (the cameras share one image processor): tapping 2 flashes Front and Back red, and the 2 applies once a camera is off. With one camera on, it can record 4K or its full sensor.
The cameras froze when I put my AirPods in.
iOS pauses the cameras while its AirPods card is on screen, and a take that was recording stops and is saved. Tap the card's ×. Interrotron adds the AirPods microphone from the next take; if it doesn't, open Interrotron again with the AirPods in.
My AirPods keep switching to Transparency when I talk.
That's Conversation Awareness. Turn it off in Settings › [your AirPods].
Which AirPod is the microphone?
The POD page marks it SUBJECT (its tab reads PODL or PODR), and the speaker button beside Record says it in each AirPod. Give that one to the Subject. Interrotron learns it from the AirPods' head-motion data, so it needs head-tracking AirPods and Motion & Fitness. Without them, the L and R show ?: tap the microphone AirPod (choose Always Left or Always Right in Settings so you know which it is).
The Subject hears their own voice.
With SUBJECT set to iPhone mic, the iPhone picks up the Subject when they are near it. Move them away from the iPhone, or set SUBJECT to Nothing.
The Shooter hears their own voice.
That's the iPhone mic, which plays only with SUBJECT set to iPhone mic. Either Mono Audio is on (turn it off), or the microphone is in the Shooter's AirPod: the Shooter takes it out for a moment and puts it back in (with Automatic), or swap AirPods.
Why does the picture look flat and grey?
Log is on (Setup › Log). Apply the matching Apple Log or Apple Log 2 conversion in your editing app; the files are tagged so it can.
Where are my recordings?
In Takes (the film-strip button, first on the bar with Record), one folder per take. Share them from there, or copy them with Finder file sharing on a Mac. See Privacy.
How do I save a video to Photos?
Long-press the video in its take and choose Save to Photos, or tap the photo button while it plays. If you said no when iOS asked, allow it in Settings › Apps › Interrotron › Photos.
How do I make one video from the cameras?
In Takes, tap a take, then Multicam edit. It starts with one picture that cuts between all the take's cameras, by faces and to the front camera when the Shooter talks. Other layouts show two or three cameras at once. Tap Make edit-01. Each edit is a new movie in the take's folder (edit-01.mov, edit-02.mov and so on); the recordings are untouched. The cameras pause while it is made.
A voice sounds doubled in an edit.
With AirPods, the iPhone mic hears the Subject too, from further away and a little late. In Multicam edit, with Follow the talker on, set Bleed to None (the default, Less, keeps a little of the other mics).
The zoomed-in shot is shaky.
In Setup, set Stabilize to Main + Telephoto: the lenses with optical stabilization use it while recording (the ultra wide and the front camera have none). It steadies the recording, not the preview, and adds heat, so iOS may slow or stop the cameras sooner. In Multicam edit, tap a camera beside Stabilize to steady it in the edit, zoomed in just enough that no edge shows.